Loading...
HomeMy WebLinkAboutPU Revision Approval 08.03.25 Page 1 of 1 From: Timothy Payseur Sent: Tuesday, March 25, 2008 4:12 PM To: 'Oak City Homes' Cc: Beau Harrison; Mickey Bennett; Mark Locklear; Joseph Jeffries; Samantha Ficzko; Bryan McSwain; Oliver Tolksdorf Subject: RE: Ballard Woods Phase 4A Grey,   Harnett County Department of Public Utilities is ready to release the final plat for Ballard Woods Phase 4A for 22 lots on septic tanks if Environmental Health is OK with the final soils report and associated sewer easements (where applicable).  However, the final plat for Phase 4A cannot indicate county sewer is available since the outfall line to the FV-Lillington Wastewater Interceptor has not been installed.  In addition, the easements for the proposed sewer outfall line must be acquired soon, but this will not delay the approval or recordation of Phase 4A.  The sewer service laterals for the lots in Phase 4A must be protected from damages by builders until they are connected to the houses at a later time.  Let me know if anyone has any questions.   Regards,  Tim ============================== Tim Payseur, Senior Engineering Technician Harnett County Department of Public Utilities 308 West Duncan Street P O Box 1119 Lillington, NC  27546-1119 Phone: (910) 893-7575, ext 3275 Fax: (910) 814-4024 E-mail: tpayseur@harnett.org www.harnett.org ==============================   Water Use It Wisely           -----Original Message----- From: Oak City Homes [mailto:greyoch@nc.rr.com] Sent: Tuesday, March 25, 2008 2:12 PM To: Samantha Ficzko; Joseph Jeffries; Mark Locklear; Mickey Bennett; Timothy Payseur Cc: Beau Harrison Subject: Ballard Woods Phase 4A   Welllll......where do we stand now with phase 4A.  Samantha, you should have the bond, the fees have been paid, environmental has been met with and seem okay, public utilities is okay (we are working with whomever now to get moving on sewer line surveying, easements, etc.), what if anything could be left? We need to get approval on this asap (we've lost 8 presales due to the delays with this s/d approval). Thanks Grey file://C:\Documents and Settings\subdivision\Local Settings\Temp\ELF25D\PU Revision ...3/16/2009